How To Create SFTP User for a Web Server Document Root

SFTP (SSH/Secure File Transfer Protocol) is a network transmission standard used to transfer, access, and manage files over a remote network. It contains SSH (Secure Shell), making it a lot more secure than the FTP protocol.

Files are transferred through a single control channel in SFTP. It requires authentication and runs on port 22. In SFTP, the SSH shell provides encryption that helps protect usernames, passwords, and other personal data transferred through SFTP.

Advertisement

In this how-to guide, we will learn to create SFTP users for web server document root.

Step 1 – Installing SSH (Secure Shell)

SFTP is a very secure file transfer protocol because of the encryption that SSH provides for the data as it is transferred over the network. SSH is mainly installed on Linux distributions by default, but if it is not pre-installed in your system, then you can use the below-given command to install it:

sudo apt install ssh 

If already installed, the command will upgrade OpenSSH packages.

Step 2 – Configuring SSH to use the SFTP Server Code

Now open the configuration file of SSH in a text editor to modify it for SFTP server code. Here we will use the nano editor to edit the configuration file.

sudo nano /etc/ssh/sshd_config 

Locate the line starting from “Subsystem sftp”.

Comment the line by adding # at the start of the line and write the following line after this line as shown in the screenshot given below:

Subsystem sftp internal-sftp

The SSHD will use the SFTP server code instead of running the SFTP server by changing the above line.

Once you have changed the configuration file, save the file and exit from it using the keyboard shortcut keys CTRL+S and CTRL+X.

After changes, we need to restart the SSHD daemon to let the changes work.

sudo systemctl restart sshd 

Step 3 – Creating a User(SFTP User)

It is an excellent practice to create a new user that only has SFTP access to the document root. It is not recommended to add a user with Sudo privileges to the webserver document root. Create a new user using the adduser command:

sudo adduser sftpuser 

The terminal will ask for a couple of things like setting the password, and user information. It will also ask for a few other details, so either leave them empty or provide the proper information.

A new user with the name of sftpuser is successfully created.

Step 4 – Creating Match User Directive in the SSH configuration file

Now we will restrict this user to the document root and we will also disable the user’s access to SSH so that the user will log in through SFTP.

To restrict the user’s access, open up the configuration file of SSH in any text editor:

sudo nano /etc/ssh/sshd_config 

Now go to the end of the file and add the following content in the “sshd_config” configuration file:

Match User sftpuser
        ForceCommand internal-sftp 
        ChrootDirectory /var/www/
        PasswordAuthentication yes
        X11Forwarding no 
        AllowTcpForwarding no 

Make sure to replace the “sftpuser” username with the username you set.

Once the above content is added to the SSH configuration file, save and exit using CTRL+S and CTRL+X shortcut keys.

To check the syntax and verify if everything went well, you can execute the command:

sudo sshd -t 

If no error occurred, we could reload the SSH service for the changes to work.

sudo systemctl restart sshd 

Step 5 – Adding SFTP User to www-data Group

Now we will add the user to the www-data group by executing the following command:

sudo usermod -a -G www-data sftpuser 

On a successful run, no output will be displayed.

Step 6 – Setting Document Root Directory Permission

Please follow the subsequent instructions very carefully as SFTP is very strict regarding chroot directory permissions.

1. We will start by checking the current permissions and ownership of var:

   sudo ls -ld /var/ 
   

2. The permissions should be 755 and the owner should be root by default. If not, then execute the command given below to set the proper permissions:

   sudo chmod 755 /var/ 
   

3. Now use this command to set the correct ownership:

   sudo chown root:root /var/ 
   

Similarly, apply the same permissions to the chroot:

sudo chmod 755 /var/www/ 

4. Since we have set “/var/www/” to the chroot directory. Now set the right ownership of the chroot directory:

   sudo chown root:root /var/www/ 
   

5. To allow a group to write to the document root directory, set its permission to 755:

   sudo chmod 755 /var/www/html/ 
   

6. To grant the ownership of the “/var/www/html” document root and its further directories and files to the www-data group, use the below-given command:

   sudo chown -R www-data:www-data /var/www/html* 
   

7. Now give 755 permissions to the content placed in the “/var/www/html” document root using the command:

   sudo find /var/www/html/ -type d -exec chmod 775 {} \; 
   

8. The above command will grant the SFTP user read, write, and executable permissions of the directories.

   We also need to give 664 permissions to all the files that are present in the document root to allow the owner and the SFTP users’ group to read and write the files:

   sudo find /var/www/html/ -type f -exec chmod 664 {} \; 
   

9. Now for the last step, make certain that all the new files and directories acquire the www-data group that are created the newly created SFTP user:

   sudo find /var/www/html -type d -exec chmod g+s {} \; 
   

Congratulations! your new SFTP user has been created and added to the webserver document root. You can now log in to SFTP.

Conclusion

In this how-to guide, we have learned how to install and configure SSH for using the SFTP server code. After that, we created a new user, restricted them to document root, and disabled their SSH access. Then we added the user to the webserver document root to allow the user to read, write and execute files in the document root.